Cisco Power Supply, AC ASR-920-PWR-D
1 €DC Power Supply for Cisco ASR-920
-
Cisco PWR-C1-715WAC-P/2 Catalyst 3850/9300 Power Supply, 80+ Platinum, 715W
1 €Power supply for the Cisco Catalyst 3850/9300 switch PWR-C1-715WAC-P/2 with a power output of 715 W and an efficiency rating of 80+ Platinum. -
Cisco Transceiver, GLC-BX-U Optical SFP
1 €1000BASE-BX SFP, 1310NMGeneral Networking Expansion / Connectivity Compatibility Information -
Cisco Transceiver, GLC-LH-SMD Optical SFP
1 €The Cisco GLC-LH-SMD optical SFP transceiver transmits data at a speed of 1 Gbps over a distance of up to 10 km (optical carrier wavelength of 1310 nm). -
Cisco Transceiver, GLC-SX-MMD Optical SFP
1 €The Cisco GLC-SX-MMD 1000BASE-SX SFP module is designed for operation over multimode fiber at distances up to 550 meters.
-
Cisco Transceiver, GLC-TE= Optical SFP
1 €1000BASE-T Cisco SFP transceiver, for Category 5 copper wire, RJ-45 connector, extended temperature range Read the Cisco SFP transceiver review: GLC-T vs. SFP-GE-T vs. GLC-TE -
Cisco Transceiver, QSFP QSFP-40G-LR4=
1 €Cisco Transceiver, QSFP, 40GBASE-LR4, Duplex LC, Single-mode, wavelength TX-1310 nm / RX-1310 nm, up to 10 km, full-duplex -
Cisco Transceiver, QSFP-100G-ER4L-S
1 €The Cisco QSFP100 ER4-Lite module supports channel lengths of up to 40 km over single-mode fiber (G.652, SMF) with duplex LC connectors. A 100 Gigabit Ethernet signal is transmitted over four wavelengths. Achieving the maximum range of 40 km requires the use of FEC (forwarding error correction) on the host platform. Without FEC, the…
-
Cisco Transceiver, QSFP-100G-ER4L-S Optical Module
1 €The Cisco QSFP100 ER4-Lite module supports channel lengths of up to 40 km over single-mode fiber (G.652, SMF) with duplex LC connectors. A 100 Gigabit Ethernet signal is transmitted over four wavelengths. Achieving the maximum range of 40 km requires the use of FEC (forwarding error correction) on the host platform. Without FEC, the range is 30 km. -
Cisco Transceiver, QSFP-100G-LR-S
1 €.The Cisco QSFP 100Gbps LR4-S module supports a channel length of up to 10 km over single-mode fiber (G.652, SMF) with LC duplex connectors. It complies with the IEEE 100GBASE-LR4 specification, which does not use FEC (forwarding error correction).
-
Cisco Transceiver, QSFP-100G-LR4-S
1 €.The Cisco QSFP 100Gbps LR4-S module supports a channel length of up to 10 km over single-mode fiber (G.652, SMF) with LC duplex connectors. It complies with the IEEE 100GBASE-LR4 specification, which does not use FEC (forwarding error correction).
-
Cisco Transceiver, QSFP-100G-ZR4-S
1 €.The Cisco QSFP-100G-ZR4-S transceiver supports lines up to 80 km long. The signal is transmitted at a speed of 100 Gbps over an SMF cable.
End of content
End of content
